MEMJET EVO MODULE FOR YAMAHA MT-01 YZF-R1
Untouched & Never "Tried On" Fresh Stock 🤝
Memjet Evo – Performance Tuning At It's Simplest
Memjet Evo Module
- Memjet Evo Module
- Wiring harness
- Fitting instructions
If you're looking for the simplest and most inexpensive way to tune your bike, then meet Jetprime Memjet Evo, the plug-and-play power module from Italy's no.1 performance tuning specialist.
Jetprime Memjet Evo requires no prior tuning experience, so you can easily fit it yourself, and remove it just as easily should you need to.
Memjet Evo is available for a huge range of fuel-injected bikes, and is ideal if you want a crisper, more responsive ride, or if you have an aftermarket exhaust and air filter fitted.
How Does It Work?
Memjet Evo connects to the bike's air tempurature sensor and works by allowing you to adjust the sensor's output using the control dial on the module. The MemJet Evo sends a colder/denser air value to the ECU, which responds by calling up more aggressive on-board mapping. The further you turn the dial, the more aggressive the mapping.
The dial reads from 0-10, where 0 represents no adjustment of the stock output (handy if your bike is in for testing). A setting of around 5 is generally best for most unmodifed bikes, greater than 5 for modified bikes, but a quick 5-10km test ride, gradually increasing the setting as you go, is usually all it takes work out which setting you like the most.
A higher setting is not necessarily better. You'll know when you've found the optimum setting because engine response across the entire rev range will have improved, and any jerkiness and / or blank spots should have all but disappeared.
- Plug and play
- No expensive remapping or dyno tuning required
- Improved performance across the entire rev range
Looking for more control over engine mapping?
Then take a look at the Jetprime Programmable Power Module also available from our store. Like Memjet Evo, the Jetprime Module is easy to fit, but comes with software that gives you control over ignnition timing intervals.
Fed up with your engine cutting out, stalling, and jerkiness, especially in the low rev range? The check out Oxymett from Jetprime. Oxymett is a lambda probe emulator and has been developed for a wide range of Ducati, Aprila, Moto Guzzi, MV Agusta and BMW boxer models.
- Yamaha YZF-R1 2007 - 2018
- Yamaha MT-01 2005 - 2009