Afterpay and ZIP Available at Checkout
Honda CBR1000RR 2008 - Onwards LSL Superbike Conversion Kit and Handlebars (for craig)

Honda CBR1000RR 2008 - Onwards LSL Superbike Conversion Kit and Handlebars (for craig)

Fresh New Fully Packed up Stock ūü§ô

This LSL superbike handlebar kit for the CBR1000RR is designed so it can be installed with normal workshop equipment on the made-to-stock bike. If you are not a trained motorcycle mechanic, you may wish to consult a dealer in your area for installation.

Depending on the bike type, different methods are used to implement the conversion to a superbike handlebar. Depending on the bike model, longer brake hoses, new brake fluid container holder or fairing brackets may be required. Based on different producer specifications in most cases the original bar ends can not be used any more. Also, it is sometimes unavoidable due to the design of the fairings that these must be shortened or cut out from below.

Please note that the appropriate handlebars are not provided in the kit and have to be ordered separately (see below).


  • Comes with complete top yoke
  • Material: anodised aluminium
  • Required brake line included (stainless steel)
  • Required clutch line (or clutch cable) included
  • Installation should only be done by an experienced specialist
  • Includes two adapters to be mounted on the slider tubes

LSL has taken extreme care in the manufacture of its aluminium bars. After extensive testing, in conjunction with a university, they decided on a specially made aluminium raw material that resists a bending load by more than 60% over the required German standard. At the same time it's high tensile quality means flexing but never breaking. For this quality, LSL Superbike handlebars have achieved TÜ

LSL aluminium bars have 7/8" outer diameter and 4.0mm wall thickness (14mm inside). The bars come high-polished in strong anodised colours.

Material: Aluminium 2014 T6
Diameter: Outer: 22.2mm / Inner: 14mm
Material: anodised
Dimensions: See diagram above (in images)
Colours: Blue, Gold, Matt Black, Nickel, Red, Silver, Black or Titanium 
Clamping area: Approximately 175mm

Note: Please check the length of your hydraulic lines and cables before ordering.